Responsible for the concept design/modifying of integrated EDU housing (incl. lubrication & cooling system) acc. To customer requirement input (SOR);
根据客户SOR 技术要求，负责电驱动集成式壳体概念设计及优化（含润滑与冷却系统；
▪ Lead the definition & checking of both the internal mechanical interface with GearBox
(e.g. gears & shafts/bearings/differential/seal.) and the External boundary & mechanical
interface with customer (e.g. e motor/inverter/vehicle);
主导减速箱内部机械接口（与齿轴轴承 差速器 油封等）和外部边界、机械接口（与电
机 控制器 整车等）的定义及匹配检查；
▪ Responsible for the creatio n of technical documents incl. BOM/3D modeling/2D
drawings/DFMEA/Special characteristic list etc. based on engineering development time
plan . Work closely with global engineering team in development.
根据工程开发计划，负责BOM/3D 数模 /2D 工程图 / DFMEA 及特殊特性清单等技术文档交付；开发过程中与国外 工程团队进行紧密合作；
▪ Support the Prototype Manufacturing/Measurement/DVP testing & failure
troubleshooting; lead the preparation of Assemble process specification.
支持壳体样件试制、检测、相关DVP 测试（如润滑试验等）及试验过程问题分析与解决；主导装配技术规范的编制；
▪ Support EDU NVH topic related Housing design modifying.
支持电驱动NVH 相关壳体设计优化；
▪ Perform design variant investigations and present the comparisons
进行设计变量调查并展示比较结果
▪ Perform design optimizations until design targets are achieved within the boundary of
project timeline.
在项目时间范围内，进行设计优化直到达成设计目标
▪ Perform CAD model quality check and continuously guaranty good quality in design
执行CAD 模型质量检查，持续保证设计质量
▪ Deliver inputs for CAE and actively ask feedback from CAE analysis
为CAE 提供输入信息，并积极寻求 CAE 分析的反馈


▪ Escalation of design issues and risks in time and early enough

及时和尽早地升级设计问题和风险

▪ Share design tips and lessons learnt to the team

分享设计技巧和经验教训给团队

其他信息


所属部门：BMB