Responsibilities：
-Participate TFC and Contract Review meeting to identify potential supplier risks
-Responsible to define CLD according to ASM, implement necessary audit to supplier process at different phase, such as PPAP trial run, run at rate etc.
- According to defined frequency in CR to track and check supplier APQP progress and ensure supplier can meet Autoliv requirements both on component quality and on timing plan control.
-Define the level of PPAP submission and content details, perform PPAP validation and assure supplier PPAP to be approved correctly.
-Perform run at rate and early containment of supplier production as per ASM.
-Responsible for supplier problem solving process before PPAP moves to plant.
-Responsible for the management of the development process of supplier projects of owned segement.
-Owner of the 8D and NCM process from D4 to closure (including NCM issues from all Divisions).
-Supplier’s project development and approval (APQP, PPAP)
o Involved in the TFC and CTS process with Purchasing, Engineering and Suppliers.
o Involved in CLD definition together with Project Buyer and Engineering.
o Involved in contract review with Project Purchasing.
o Define the SQP tasks based on the CLD and PPAP level required.
o Follow up completion of SQP tasks in terms of timing and quality for defined deliverables.
o Lead supplier production trial runs and Participate in Run at Rate per CLD.
o Perform audits and PFMEA go and see as applicable for new projects.
o Define the Incoming inspection / DAR template and manage the IIP (AS412) at the supplier as applicable.
o Owner of the PPAP approval. (Ref. AS007, AS404 and AS100)
o Escalate SQP delays / deviations according to AS404
-Lead ZD and SD activities (Zero Defect and Supplier Development) for assigned suppliers.
-Perform Yokoten within his/her division and initiate global actions with other Segment SQ when applicable following the direction of SQ-GPAD/S.
-Contribute to ALV electronic supplier management procedure, Specific Master PFMEA and S-MPS creation and governance when assigned.
-Execute supplier audits per AS002 and AS069.
-Support other divisions in terms of supplier onsite activities when requested.
- AS051 supplier rating and appropriate escalation.
-Finish tasks assigned by Manager.
Travel frequency of the job： more than 50%

Requirements:
-Knowledge of quality standards such as ISO 9000 , QS 9000 VDA6.1 or IATF16949
-Familiar with Quality Management tools such as APQP,FMEA,MSA,SPC,8D tools
-Experience in plastic, stamping, painting, PVD process is preferred.
-Knowledge of environment standard ISO14001, Occupational Safety and Health standard OHSAS 18001
-Knowledge of the electrical hardware like ESD, MSL, AEC-Q, CQI-17, IPC-A-610 preferred
-Familiar with ASPICE，ISO26262，ISO2700X，TISAX，ISO/SAE21434 preferred.

其他信息

行业要求：全部行业